Service hotline
+86 18518316054
Current location : Home page > Products > Photocatalytic Xenon light source > Photocatalytic Xenon lamp light source system CEL-PF300-T10 
Photocatalytic Xenon lamp light source system CEL-PF300-T10
Model：CEL-PF300-T10 Xenon lamp light source system
Place of Origin：Beijing
CEL-PF300-T10 xenon lamp light source system is widely used in photolysis of water, photolysis of aquatic hydrogen oxygen production, CO2 reduction, photothermal catalysis, VOCs degradation, photothermal synergy, photochemical catalysis, photoinduced synthesis, photodegradation of pollutants, water pollution treatment, biological light, optical detection, various types of simulated daylight, visible light, ultraviolet light, monochromatic light acceleration experiments and other fields.
CEL-PF300-T10 xenon lamp light source system adopts seven-inch touch color screen; intelligent control system; adopts fiber optic light feedback function to ensure the stable output of light source; can be used with the whole series of reactors and systems of CEL-Jinyuan; modular design, quick connection of accessories; adopts low pressure controllable speed fan to achieve constant heat dissipation and stable light output; realizes the safe work of the lamp box with low pressure; can be simple and fast by itself Safe lamp replacement.
CEL-PF300-T10 xenon lamp light source intelligent system to achieve automatic power on, off, optical power density display, calibration and automatic adjustment, custom switch times and frequency, to achieve digital monitoring, program mode can be based on the requirements of different stages of the experimental time automatically adjust the light intensity at the right time (can fully simulate the changes in daylight throughout the day). Through the expansion module can be used remotely with software or cell phone applet to achieve real-time online monitoring of the light source.
Item | PF300-T10 | PUV300-T10 |
Input(Watts) | 300W（150W~320W） | 300W（150W~320W） |
Current (Amps DC) | 21A（10A*22A） | 21A（10A*22A） |
Voltage (Volts DC) | 14V（13V~16V） | 14V(13~16V) |
Light stability | Fiber light feedback achieve the stable light intensity output; Adopt to fiber bring the pointed light to Hamamatsu sensor；It can eliminate the temperature drift of Hamamatsu sensor and realize stable and long-term signal feedback and optical output | |
Intelligent control system | The working time, light intensity are adjustable automatically as request；Bulb,power supply, sensor etc are with temperature monitor to ensure the light source work stably | |
Working mode | Normal mode（Fiber light feedback be off）；Fiber feedback mode；Program intelligent mode；automatic mode etc. | |
Light intensity display | Test point calibrate based on optical meter （factory calibration: working distance 15cm），working light intensity real-time display；K-rating correction function，correct the light output according to the test value real-time； | |
Light intensity（1Sun=1000W/m2） | 0~20 Sun | 0~20 Sun |
UV Output, <390nm | 2.6W | 6.6W |
IR Output, >770nm | 28.8W | 26.8W |
Visible Output, 390-770nm | 5000Lu | 4500Lu |
Color Temperature (Kelvin) | 5600K | 5050K |
Window Diameter (mm) | 25.4mm | 25.4mm |
Bulb Lifetime（Hours） | 1000~2000H （Operating as request） | 1000~2000H （Operating as request） |
Spectral Output(nm) | 300nm~2500nm | 200nm~2500nm |
Light output index | Light stability：±1％ | |
Temperature control system | Adopt to multi points temperature control system, ensure the light output stably.； Fan’s rotational speed delay adjustable automatically according to the light source system temperature. | |
Optional | CEL-LMP400 automatic lifting platform; CEL-LB70 Photochemical experiment cabinet; CEL-NP2000-2A automatic light intensity meter | |
Related products
Related reports